Error Code 407

This error occurs when Tally.ERP 9 is unable to connect to the configured Tally Gateway Server and Port.

Possible Reason for Failure

●      If the Tally Gateway Server specified in the Configure Existing License screen does not exist in your current network, this error may occur.

Possible Solutions

●      Check if the Server name/IP address and Port specified in the Configure Existing License screen is correct.

●      Alternatively, press F2 in the Configure Existing License screen to select a Tally Gateway Server.

●      Go to Control Panel and check if the LAN connection is enabled or disabled on your computer. If the connection is disabled, enable it.

●      Check if your LAN cable is connected to both your computer and the network wall socket.

After you have resolved the issue you can:

●      Reconfigure your existing license, or

●      Press F2 in the Configure Existing License screen to search for Tally Gateway Servers.